Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Insert the flat end of a spudger between the front display bezel and the plastic rim attached to the rear bezel near the lower left corner of the display.
[* icon_caution] '''Do not''' try to insert the spudger between the front display bezel and its plastic surround.
[*
black] UseWhile carefully prying the rear display bezel away from the display assembly, use a thin flat headsmall flathead screwdriver to depresspry the rightward most inward clipsmall steel clip nearest the bottom right corner of the display away from the edge of the front display bezel.
[* black] Repeat the above procedure until you've released at least three clipsall the clips along the right side of the display.
[* icon_caution] '''Do not''' try to insert the spudger between the front display bezel and its plastic surround.
[*
black] UseWhile carefully prying the rear display bezel away from the display assembly, use a thin flat headsmall flathead screwdriver to depresspry the rightward most inward clipsmall steel clip nearest the bottom right corner of the display away from the edge of the front display bezel.
[* black] Repeat the above procedure until you've released at least three clipsall the clips along the right side of the display.