Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Insert the flat end of a spudger between the front display bezel and the plastic rim attached to the rear bezel near the lower leftright corner of the display.
[* black] Insert the flat end of a spudger between the front display bezel and the plastic rim attached to the rear bezel near the lower leftright corner of the display.
[* icon_caution] '''Do not''' try to insert the spudger between the front display bezel and its plastic surround.
[* black] While carefully prying the rear display bezel away from the display assembly, use a small flathead screwdriver to pry the small steel clip nearest the bottom right corner of the display away from the edge of the front display bezel.
[* black] Repeat the above procedure until you've released all the clips along the right side of the display.