Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Walter Galan

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* icon_note] In the following steps, you will use a heat gun to soften the adhesive securing the outer aluminum border around the underside of the front glass panel to the display.
[*
black] Insert wisdom hereWith the heat gun set to low, start by heating the outer aluminum border near the lower right corner of the display panel.
[* icon_note] In the following steps, you will use a heat gun to soften the adhesive securing the outer aluminum border around the underside of the front glass panel to the display.
[*
black] Insert wisdom hereWith the heat gun set to low, start by heating the outer aluminum border near the lower right corner of the display panel.