Skip to main content

4. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* icon_noteicon_caution] In the following steps, you will use a heat gun to soften the adhesive securing metal LCD frame to the outer aluminum border aroundfront display bezel. Heat guns have the undersidecapability of the front glass panelproducing an extremely hot jet of air, so be sure not to overheat the displayLCD panel.
[* black] With the heat gun set to low, start by heating the outer aluminum borderfront display bezel near the lower rightupper left corner of the display panel.
[* icon_noteicon_caution] In the following steps, you will use a heat gun to soften the adhesive securing metal LCD frame to the outer aluminum border aroundfront display bezel. Heat guns have the undersidecapability of the front glass panelproducing an extremely hot jet of air, so be sure not to overheat the displayLCD panel.
[* black] With the heat gun set to low, start by heating the outer aluminum borderfront display bezel near the lower rightupper left corner of the display panel.