Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Walter Galan

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* icon_caution] In the following steps, you will use a heat gun to soften the adhesive securing the metal LCD frame to the front display bezel. Heat guns have the capability of producing an extremely hot jet of air, so be sure not to overheat the LCD panel.
[* icon_caution] In the following steps, you will use a heat gun to soften the adhesive securing the metal LCD frame to the front display bezel. Heat guns have the capability of producing an extremely hot jet of air, so be sure not to overheat the LCD panel.
[* black] With the heat gun set to low, start by heating the front display bezel near the upper left corner of the display panel.