Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

2. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Open the cord winding flaps.
[* black] InsertHeat the power brick's plastic casing with a hair dryer, and/or [https://d3nevzfk7ii3be.cloudfront.net/igi/SyiX2fMVNKIDfWkG|run a razor blade along the seam between the two halves of the casing|new_window=true], in order to weaken the adhesive. This will make it easier to pry the case open.
[* black] Insert your
pliers and pry slowly. (Be careful to makeMake sure they stay seated in the inside corners, or you may injure yourself or gouge the case.)
[* black] The cord winding flap will fall out.
[* black] InsertHeat the power brick's plastic casing with a hair dryer, and/or [https://d3nevzfk7ii3be.cloudfront.net/igi/SyiX2fMVNKIDfWkG|run a razor blade along the seam between the two halves of the casing|new_window=true], in order to weaken the adhesive. This will make it easier to pry the case open.
[* black] Insert your
pliers and pry slowly. (Be careful to makeMake sure they stay seated in the inside corners, or you may injure yourself or gouge the case.)
[* black] The cord winding flap will fall out.
[* black] Do the same on the other side.
[* black] Work slowly!