9. Adımdaki Değişiklikler
Düzenleyen: Jarno De Bruyn —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Clean up the digitizer with lint free wipes or a clean microfiber towel. I used some lens cleaner on a microfiber cloth to clean mine up. | |
| [* black] I probably did a terrible job of removing the glass and the digitizer appears scratched. If yours does look like this as well it's no problem, when the screen is turned on it's not noticeable. | |
| - | [* black] ****EDIT* If you want to really get the screen almost perfectly clean use some Eucalyptus oil and either a plastic razor blade or a plastic putty knife to clean off the sticky residue. It does take some time to get clean, but it will look nearly flawless when you are done. You can see in the second pic. This took me maybe 30 minutes.*** |
| - | [* black] ***After the screen has been cleaned with the Eucalyptus oil use some LCD cleaning spray and a couple LCD cleaning cloths to clean the oil residue from the LCD/Digitizer. I used 2 LCD cleaning kits from Dollar Tree. Cheap and easy.*** |
| + | [* black] ****EDIT* If you want to really get the screen almost perfectly clean or if the glue residue won't come off, use some nail polish remover (WITHOUT ACETON!!!). It takes only a few seconds to get all the dirt off and it will evaporate: it will look nearly flawless when you are done. You can see in the second pic. This took me maybe 2 minutes.*** |