4. Adımdaki Değişiklikler
Düzenleyen: Andrew Bookholt —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] Fasten the two steel brackets to the upper case using their black 1.5 mm Phillips screws. |
|---|---|
| + | [* black] Reinstall the T6 Torx set screw until it is flush with the aluminum bracket surrounding the trackpad. |
| [* black] Place the trackpad back into its void in the upper case, being sure the lower tabs are inserted underneath the keyboard side of the upper case. | |
| [* icon_note] Be sure the trackpad ribbon cable is not pinched between the trackpad and the upper case. |