MacBook Unibody Model A1342 Upper Case Replacement 5 No'lu Adım Geçmişi

5. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt — 26 Mar 2010

	[* black] Reinstall the four silver screws securing the trackpad to its steel brackets.
	[* black] Loosen all four silver screws about 1/16th of a turn.
	[* black] Flip the upper case over and adjust the position of the trackpad until the gap between the trackpad and the upper case is evenly spaced around the perimeter of the trackpad.
	[* black] Tighten the four silver screws to hold the trackpad in place.
	[* icon_note] Repeat this process until the trackpad is perfectly positioned in its void on the upper case.
+	[* black] While repeatedly pressing the trackpad to simulate clicking, tighten the T6 Torx set screw until the trackpad no longer wiggles freely.
+	[* icon_caution] Do not over-tighten the set screw, as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play.