Skip to main content

11. Adımdaki Değişiklikler

Düzenleyen: Bob M

Düzenleme onaylandı by Bob M


Adım Satırları

[* black] at this point, i disconnected the wire connector and ribbon cable from the board, and laid it down to remove the chip and insert the new one.
[* black] i'm somewhat used to dealing with ribbon cables and it took me about 10 minutes to get it back in the slot with someone holding the flashlight.
[* black] looking back on it, if that person were around prior to me having to remove the chip i would have had them hold the board as you can see my hand in the pic
[* black] removing the chip with the board still connected and someone holding it should be easy.

Resim 1

Önceki resim yok