Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

6. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Disconnectblack] In the display cable fromfollowing steps you will disconnect the main board by flipping upthree cables attaching the pull tab, and pullingdisplay assembly to the connector directly upward.
[*
logic board. The cables are for the:
[* red] Digitizer
[*
orange] Using an iPod opening tool, flip up both tabs, then slide out the LCD cables.
[*
Ambient Light Sensor
[*
yellow] Using an iPod opening tool, remove the ambient light sensor connector from its socket by gently prying upward.Display Data Cable
[* red] Disconnectblack] In the display cable fromfollowing steps you will disconnect the main board by flipping upthree cables attaching the pull tab, and pullingdisplay assembly to the connector directly upward.
[*
logic board. The cables are for the:
[* red] Digitizer
[*
orange] Using an iPod opening tool, flip up both tabs, then slide out the LCD cables.
[*
Ambient Light Sensor
[*
yellow] Using an iPod opening tool, remove the ambient light sensor connector from its socket by gently prying upward.Display Data Cable

Resim 1

Eski Sürüm

Yeni Sürüm