1. Adımdaki Değişiklikler
Düzenleyen: Walter Galan —
Düzenleme onaylandı tarafından Walter Galan
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
[* black] Remove the two screws securing the upper component bracket: | |
[* red] 4.0 mm Phillips #000 | |
- | [* orange] 2.3 mm Phillips #000 (Be careful when reassembling!!!!, if you insert the 4.0 mm screw instead of this one, the LCD will get damaged). |
+ | [* orange] 2.3 mm Phillips #000 |
+ | [* icon_caution] It is imperative that the right screws are inserted into their respective holes. Otherwise it may cause severe damage to the LCD during reassembly. |