3. Adımdaki Değişiklikler
Düzenleyen: Kevin Daily —
Düzenleme onaylandı tarafından Kevin Daily
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Peel the back off of the new traction pad to reveal the adhesive. | |
| [* black] When placed, the traction pad should be about an inch away from the rear binding. | |
| [* black] To avoid creating air bubbles, start with one corner of the pad and roll the rest down. | |
| [* black] Press down firmly to help it stick to the board and remove any air bubbles that may have occurred. | |
| - | [* black] Give the adhesive 12 to 24 hours to dry. |
| + | [* black] Give the adhesive 12 to 24 hours to dry before use. |