Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

3. Adımdaki Değişiklikler

Düzenleyen: Bijan Vakilifathi

Düzenleme onaylandı tarafından Bijan Vakilifathi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Wedge an appropriately sizeda plastic opening tool into the case-splitting near the “Share” button. Pull down to crack open the casing.
[* black] Wedge an appropriately sizeda plastic opening tool into the case-splitting near the “Options” button. Pull down to crack open the casing.
[* black] Wedge an appropriately sizeda plastic opening tool into the case-splitting near the “Share” button. Pull down to crack open the casing.
[* black] Wedge an appropriately sizeda plastic opening tool into the case-splitting near the “Options” button. Pull down to crack open the casing.
[* black] Split the plastic casing of the controller in two.
[* icon_caution] During this step, three small pieces will likely be released from the framework that are necessary for critical functions of the controller. To prevent losing these pieces, maintain a controlled work field.
[* orange] 2 trigger springs & a grey reset button extension