Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: 20thme

Düzenlenme reddedildi tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_note] If you are reattaching the same shield plate to a new display, there is no need to peel the cable assembly off the LCD shield plate. Skip this step.
[* black] Carefully peel the cable assembly off of the LCD shield plate to remove it from the display.
+[* black] Carefully unfold the old cable assembly, and peel the shield plate off the back of the front-facing camera. Reinstall same shield onto new cable assembly, or install new shield in the same orientation as the old one.
[* icon_caution] Be careful not to grab the digitizer cable while peeling up the front facing camera and sensor assembly cable.