Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Erik Hoffnagle

Düzenleme onaylandı tarafından Erik Hoffnagle

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] After removing the two cover screws, lift and slide the cover out of position to access the hard drive. (Note from Andy: You should show the screwdriver unscrewing one and give the size of the screws and the driver.)
[* black] After removing the two cover screws, lift and slide the cover out of position to access the hard drive. (Note from Andy: You should show the screwdriver unscrewing one and give the size of the screws and the driver.)
[* red] Grab the clear plastic pull tab on top of the hard drive, and lift the hard drive from the laptop.
[* black] Locate the screws that hold the first hard drive cover in the bottom right corner.
[* black] Remove the two screws using a Philips #0 screwdriver.
[* icon_caution] The screws should remain in the cover.