9. Adımdaki Değişiklikler
Düzenleyen: iRobot —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] Place enough pressure on the upper case to allow you to slide a tool just within the seam between upper case and lower case as shown in the picture. A dentist's hook, push pin, or similar tool will work. |
|---|---|
| + | [* icon_note] Do not yank the upper case off as soon as you free the clasp. The case is attached to the logic board via two ribbon cables. |
| + | [* black] Delicately slip the tip of your tool behind the silver metal latch and pull it forward while pulling up on the case. This may take some effort. |
Resim 1
Önceki resim yok
Eklendi