Eşyalarını Tamir Et Topluluk Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: Jacob M Bassetti —

Düzenleme onaylandı tarafından Jacob M Bassetti

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Use a Philips #2 screwdriver to remove the two 8 mm screws mounting the main circuit board to the inside of the shell.
-[* black] Remove the main circuit board from shell by simply sliding it out.
+[* black] Arrange the toaster and its shell so you are able to look inside of the shell itself.
+[* black] Locate and remove the two 8mm screws that attach the shell's circuit board from the shell itself using the phillips *insert size* screwdriver.
[* icon_note] The shell should now be completely separated from the rest of the toaster.