InFocus LP540 Projector Main Board Replacement 2 No'lu Adım Geçmişi

2. Adımdaki Değişiklikler

Düzenleyen: Nishant Mattu — 28 Şub 2014

Düzenleme onaylandı tarafından Nishant Mattu

-	[* red] Remove the two 77mm screws that are located nearest to the back panel ports. Use the ~~torx~~ screwdriver head.
-	[* yellow] Next, remove the two 10mm screws located near the lens side with the ~~torx~~ screwdriver head.
-	[* icon_caution] ~~Then proceed to lifting~~ up the main lid cautiously to avoid ripping the electrical strips.
+	[* red] Remove the two 77mm screws that are located nearest to the back panel ports. Use the T10 Torx screwdriver head.
+	[* yellow] Next, remove the two 10mm screws located near the lens side with the T10 Torx screwdriver head.
+	[* icon_caution] Lift up the main lid cautiously to avoid ripping the electrical strips.