InFocus LP540 Projector Main Board Replacement 2 No'lu Adım Geçmişi

2. Adımdaki Değişiklikler

Düzenleyen: Isabella Curran — 14 Nis 2021

Düzenleme onaylandı tarafından Isabella Curran

	[* black] Flip the projector over.
-	[* red] ~~Remove~~ the two 77mm screws ~~that are~~ located nearest to the back panel ports. ~~Use the T10 Torx screwdriver head.~~
+	[* red] Use the T10 Torx screwdriver head to remove the two 77mm screws located nearest to the back panel ports.
	[* yellow] Next, remove the two 10mm screws located near the lens side with the T10 Torx screwdriver head.
	[* black] Flip the projector back over.
	[* icon_caution] Lift up the main lid cautiously to avoid ripping the electrical ribbons.