Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* blackicon_note] The far right screw hole on the speaker has a contact bracket wrapped around it. RemoveThis small part may fall off unexpectedly, so it's best to remove it and note the orientation for reassembly.
[* blackicon_note] The far right screw hole on the speaker has a contact bracket wrapped around it. RemoveThis small part may fall off unexpectedly, so it's best to remove it and note the orientation for reassembly.
[* icon_reminder] The flat portion of the contact clip should rest against the speaker, as shown.
[* icon_note] The alignment bracket on the far end of the speaker assembly is adhered, but may fall off if handled aggressively.
[* icon_reminder] The angled end should face up and line up with the outside edge of the speaker.