Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Garrett Kissinger

Düzenleme onaylandı tarafından Garrett Kissinger

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Remove the sixseven screws that are holding in the battery. They can be seen circled in the picture.
[* black] Remove the sixseven screws that are holding in the battery. They can be seen circled in the picture.
[* black] When unscrewed, lift the battery. There will be a cable connected to the battery. Detach this cable from the board and remove the battery.
[* black] Attach the replacement battery cable to the board and reassemble. It can be seen highlighted in picture 2.
[* black] Attach the replacement battery cable to the board and reassemble. It can be seen highlighted in picture 2.
[* black] *Note: When reinserting the battery it is easier to put in the long end first and then dropping the other side in.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Eski Sürüm

Yeni Sürüm

Resim 3

Önceki resim yok

Eklendi