Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

4. Adımdaki Değişiklikler

Düzenleyen: Ryan Brown

Düzenleme onaylandı tarafından Ryan Brown

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Remove all the screws on the perimeter of the speaker. Use a small Crescent wrenchlocking pliers to remove the nuts. There are 7 total bolts holding the speaker in place.
[* black] Once removed you can now insert the new speaker the same way you removed the old one.
[* icon_note] ''When tightening the nuts back down on the bolts, be sure to tighten them by alternating, working in diagonals. (i.e. once you tighten one down go diagonal from it and work on the next one.''
[* red] Remove all the screws on the perimeter of the speaker. Use a small Crescent wrenchlocking pliers to remove the nuts. There are 7 total bolts holding the speaker in place.
[* black] Once removed you can now insert the new speaker the same way you removed the old one.
[* icon_note] ''When tightening the nuts back down on the bolts, be sure to tighten them by alternating, working in diagonals. (i.e. once you tighten one down go diagonal from it and work on the next one.''

Resim 2

Önceki resim yok

Eklendi