4. Adımdaki Değişiklikler
Düzenleyen: Angela Pitts —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] With needle nose pliers, gently bend back metal tab at bottom of click wheel PCB so you can release this board from upper metal tab. Fold away to the right and slide apart the ribbon cable from this board, place aside. Then lift LCD display away from camera and again carefully remove TWO ribbon cables (boxed in blue) and place aside. |
|---|---|
| + | [* black] With needle nose pliers, gently bend back the metal tab at the bottom of the click wheel PCB so that you can release this board from the upper metal tab. Fold it away to the right and slide apart the ribbon cable from this board and place aside. |
| + | [* black] Then lift the LCD display away from the camera and again carefully remove two ribbon cables (boxed in blue) and place aside. |