8. Adımdaki Değişiklikler
Düzenleyen: johnsawyercjs —
Düzenlenme reddedildi tarafından Alex Diaz-Kokaisl
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Remove the following six screws securing the logic board to to the upper case: | |
| [* red] One 3.1 mm T5 Torx screw | |
| [* orange] One 2.5 mm T5 Torx screw | |
| [* yellow] One 5.5 mm silver, raised-head T5 Torx screw | |
| [* green] Two 5.7 mm T5 Torx screws | |
| [* blue] One 3.8 mm silver T5 Torx screw | |
| + | [* icon_note] When reinstalling these six screws, don't tighten them down fully until you have all of them threaded loosely into their standoffs, so that the logic board can move a little as you reinstall these screws to ensure that all of them are seated properly. |