5. Adımdaki Değişiklikler
Adım Satırları
| - | [* black] Cut 2 notches on each plastic PCB covers. |
|---|---|
| + | [* black] Cut 2 notches on each plastic PCB covers. At the position of bridging wires, and faces each other. So the wires won't lift the PCB covers. |
| [* orange] These are not quite finished. | |
| + | [* blue] These are what I'm talking about. |
| + | [* black] Put both PCB covers back. If you bond batteries too tight, may need to loose a little bit, then tighten again later. |