Eşyalarını Tamir Et Topluluk Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Sarah LeClair —

Düzenleme onaylandı tarafından Sarah LeClair

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Remove the panel screw labeled with a #1 Phillips head screwdriver as indicated in the picture, then use a flat edge tool to pry the cover off.
-[* black] The hardware to the left (labeled) can be easily removed by disconnecting the black and white wires and pushing the tabs that secure it (located on the side) outwards.
+[* red] Unscrew the Wi-Fi panel screw with a #1 Phillips head screwdriver. Then pry the cover panel off with a flat edge tool.
+[* orange] Disconnect the black and white wires. Then push the tabs outward (away from the Wi-Fi card) using your fingers. The card should then pop up.
[* black] Pull the Wi-Fi card out from the device at a slight angle (horizontal with the casing).