11. Adımdaki Değişiklikler
Düzenleyen: Sarah LeClair —
Düzenleme onaylandı tarafından Sarah LeClair
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Unscrew the two screws located above the power button logic board using a #1 Phillips head screwdriver. | |
| [* black] Move the logic board slowly out of its slot using a flat edge tool and your index finger. | |
| - | [* black] Disconnect the white ribbon connected to the power button logic board, pulling firmly and steadily. |
| - | [* black] Reverse the order after installing the new power button logic board. |
| + | [* black] Pull the white ribbon upwards to disconnect the ribbon from the power button logic board. |