Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Taylor Downey

Düzenleme onaylandı tarafından Taylor Downey

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove the two 9/16" screws from the center of the top edge and the one 9/16" screw from the right edge of the computer case with the Phillips #1 Screwdriver.
-[* yellow] Remove the two 3/8" screws from the outter, upper edge of the case with the Phillips #1 Screwdriver.
-[* blue] Remove the one 11/16" screw from the left edge of the case using the Phillips #1 Screwdriver.
-[* green] Remove the three 9/32" screws from the bottom edge of the case with the Phillips #1 Screwdriver.
+[* red] Remove the three 9/16" screws from the center of the top edge and the one 9/16" screw from the right edge of the computer case with the Phillips #0 Screwdriver.
+[* yellow] Remove the two 3/8" screws from the outer, upper edge of the case with the Phillips #0 Screwdriver.
+[* blue] Remove the one 11/16" screw from the left edge of the case using the Phillips #0 Screwdriver.
+[* green] Remove the three 9/32" screws from the bottom edge of the case with the Phillips #0 Screwdriver.