Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can insert a [product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
[* icon_caution] The battery isolation pick or battery blocker is an outdated way of isolating the battery, asBe very careful when you risk damagingisolate the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straightusing a battery blocker. The battery contacts are easily damaged, resulting in the direction of the logic board. Do not twist or swing the pick side to sideirreversible damage.
[* icon_caution] The battery isolation pick or battery blocker is an outdated way of isolating the battery, asBe very careful when you risk damagingisolate the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straightusing a battery blocker. The battery contacts are easily damaged, resulting in the direction of the logic board. Do not twist or swing the pick side to sideirreversible damage.
[* black] Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.