Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Gently lift the bracket, which will disconnect the things, don't do it at a weird angle. Don't shove too hard.
+[* black] Use the flat end of a spudger to gently pry the display cable bracket straight up from the logic board.
+[* icon_caution] The display cable connector is adhered to the underside of the bracket, so don’t push the spudger too far under the bracket, or you may damage the connector.