Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

24. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_note] As you complete the next few steps, prying adhesive securing the logic board in place, always start by testing gently to see if the adhesive is softened. If not, reheat the iOpener and reapply it to the back of the rear case.
[* black] Carefully insert a guitar pick under the logic board, between the front-facing camera and the battery.
[* black] Slide the guitar pick toward the front-facing camera connector, and stop at the bend in the logic board.