Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

22. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_note] There are six piecesIn the next steps, you will use an iOpener to apply heat to the rear case of strongthe iPad to soften adhesive tape holding the logic board onto the rear casein place.
[* black] Make sure you pryred] The adhesive is in the logic board offform of each piecesix pieces of tape. Use these imagesblack foam tape—refer to this step as a guideyou work at heating and prying to check that all adhesive has been severedkeep track of where each piece is located.
[* icon_note] There are six piecesIn the next steps, you will use an iOpener to apply heat to the rear case of strongthe iPad to soften adhesive tape holding the logic board onto the rear casein place.
[* black] Make sure you pryred] The adhesive is in the logic board offform of each piecesix pieces of tape. Use these imagesblack foam tape—refer to this step as a guideyou work at heating and prying to check that all adhesive has been severedkeep track of where each piece is located.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Eski Sürüm

Yeni Sürüm

Resim 3

Eski Sürüm

Yeni Sürüm