4. Adımdaki Değişiklikler
Düzenleyen: Casey Phelps —
Düzenleme onaylandı tarafından Casey Phelps
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Orient the camera so the LCD screen is facing you. | |
| [* black] Remove any tape holding the screen down. | |
| [* black] Lift the LCD screen from the screen plate. | |
| - | [* black] Lift the hinged lip where the ribbon enters the connector. |
| - | [* black] Remove the ribbon from the logic board by gently pulling it away from the logic board. |
| + | [* black] Lift the hinged lip on the camera body where the ribbon cable enters the connector. |
| + | [* black] Remove the ribbon from the logic board by gently pulling it straight out. |
| + | [* black] Try not to kink or crease the cable. |