Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Lars Hedbor

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Orient the camera so the LCD screen is facing you.
-[* black] Remove the LCD screen from the screen plate.
-[* black] Remove the ribbon from the logic board by pulling it gently away from the logic board.
+[* black] Remove any tape holding it down, and then lift the LCD screen from the screen plate.
+[* black] Lift the hinged lip where the ribbon enters the connector. Remove the ribbon from the logic board by pulling it gently away from the logic board.