Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Casey Phelps

Düzenleme onaylandı tarafından Casey Phelps

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Orient the camera so the LCD screen is facing you.
-[* black] Remove any tape holding it down, and then lift the LCD screen from the screen plate.
-[* black] Lift the hinged lip where the ribbon enters the connector. Remove the ribbon from the logic board by pulling it gently away from the logic board.
+[* black] Remove any tape holding the screen down.
+[* black] Lift the LCD screen from the screen plate.
+[* black] Lift the hinged lip where the ribbon enters the connector.
+[* black] Remove the ribbon from the logic board by gently pulling it away from the logic board.