Bu Adımdaki Değişiklikler
Düzenleyen: Jacob Rardin —
Düzenleme onaylandı tarafından Jacob Rardin
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* icon_note] The viewfinder is held on by the top body piece. To access it, the entire plastic body must be removed. Each piece (back, bottom, front, top) helps secure the next piece. | |
| [* black] Start by removing the back panel. There are eight screws that hold it on: | |
| [* red] Two 2.5x6mm screws above the screen | |
| - | [* orange] One 3x6mm screw on the upper part of each side ( |
| + | [* orange] One 3x6mm screw on the upper part of each side (right side shown). |
| [* yellow] One 3x7.5mm screw on the lower part of each side. | |
| [* green] Two 3x4.5mm screws on the bottom. |