Bu Adımdaki Değişiklikler
Düzenleyen: Jacob Rardin —
Düzenleme onaylandı tarafından Jacob Rardin
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Pull the back panel up, then tilt it back. There will be two cables still holding it on. | |
| + | [* icon_note] Doing this will also release the connector cover on the left side. Set it aside for now, but remember to reinstall it later. |
| [* red] Disconnect the ribbon cable by flipping the black tab up, then pulling the cable out. | |
| [* icon_note] This procedure also applies to all of the other ribbon cables in the D5000. | |
| [* orange] Pull out the other connector by lifting it up with tweezers, or by prying it out. Fingernails also work well. |