Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Jacob Rardin

Düzenleme onaylandı tarafından Jacob Rardin

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] The front panel is next. Six screws hold it on:
+[* black] The front panel is next. Six screws hold it on. Start by removing four screws in the top part of the panel:
[* red] Two black 2.5x4.5mm screws above the lens mount.
- [* orange] Two black 2.5x4.5mm screws under the flash (they are the same as in the above step).
- [* yellow] One silver 3x4.5mm screw in the battery compartment
- [* black] One silver 3x4.5mm screw on the bottom surface, to the right of the above screw (see photo in next step).
+ [* orange] Two black 2.5x4.5mm screws under the flash (they are the same type of screw as in the above step).