1. Adımdaki Değişiklikler
Düzenleyen: Reid Burke —
Düzenleme onaylandı tarafından Reid Burke
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* icon_note] Big thanks to Ian Lewis of Printrbot's Support team for guiding me through fixing my Simple. |
|---|---|
| + | [* black] Your printer's hot end is comprised of two stages. The beige plastic part is a thermal break between the 200C heater cartridge and the feeding mechanism above. |
| + | [* black] The job of the beige part is to keep the filament cool before it reaches the heated element. |
| + | [* black] The part pictured is made with PEEK plastic. http://reprap.org/wiki/PEEK |
| + | [* black] For more term definitions, see http://reprap.org/wiki/RepRap_Options#Extruder |
| + | [* black] Anyway, we're here because this thing is jammed. Read on. |
Resim 1
Önceki resim yok
Eklendi