Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Reid Burke

Düzenleme onaylandı tarafından Reid Burke

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Heat the hot end to 50 degrees Celsius. This will soften the PLA plastic.
-[* black] Remove the nozzle from the hot end. Be careful when using tools that transfer heat.
+[* icon_caution] Remove the nozzle from the hot end. Be careful when using tools that transfer heat.