6. Adımdaki Değişiklikler
Düzenleyen: Reid Burke —
Düzenleme onaylandı tarafından Reid Burke
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
+ | [* black] Heat the hot end to 230 degrees. |
---|---|
+ | [* black] Slacken the idler screw. |
+ | [* black] Manually push filament through the hot end. Keep a firm pressure through any resistance. |
+ | [* black] Once the filament comes through the hot end, pull it straight out. |