Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

2. Adımdaki Değişiklikler

Düzenleyen: Philip Le Riche

Düzenleme onaylandı tarafından Taylor Dixon

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] No-Fuss Ribbon Cable Connectors
[* black] OccasionallySometimes, you'll find a ribbon cable that simply pulls out of its socket, with no locking flap. The ribbon is normally sturdier than those used with ZIF connectors and the end is often reinforced with a stiff plastic film.
[* black] These kinds of connections usually secure sturdier ribbon cables, likeconnectors are often found on larger items such as printers, projectors and games consoles, such as this PS3 control board cableboard.
[* icon_caution] Before attempting to disconnect the ribbon, make quite sure this isn't a ZIF connector (previous step) with a release mechanism, otherwise you may damage the connector or the ribbon in forcibly removing it, and you won't be able to reinsert it
.
[* black] OccasionallySometimes, you'll find a ribbon cable that simply pulls out of its socket, with no locking flap. The ribbon is normally sturdier than those used with ZIF connectors and the end is often reinforced with a stiff plastic film.
[* black] These kinds of connections usually secure sturdier ribbon cables, likeconnectors are often found on larger items such as printers, projectors and games consoles, such as this PS3 control board cableboard.
[* icon_caution] Before attempting to disconnect the ribbon, make quite sure this isn't a ZIF connector (previous step) with a release mechanism, otherwise you may damage the connector or the ribbon in forcibly removing it, and you won't be able to reinsert it
.
[* black] To disconnect the cable, pull it straight out of the connector.
[* icon_reminder] To reinstall the cable, hold it near the end and push it straight into the connector, being careful not to kink the cable.
[* icon_caution] These kinds of connectors are not as common, so check carefully for a way to release
If you can, apply the connector before you resortforce to pulling on the ribbon cableplastic reinforcement rather than the cable itself.
[* icon_reminder] To reinstall the cable, hold it near the end and push it straight into the connector, being careful not to kink the cable.
[* icon_caution] These kinds of connectors are not as common, so check carefully for a way to release
If you can, apply the connector before you resortforce to pulling on the ribbon cableplastic reinforcement rather than the cable itself.