Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

3. Adımdaki Değişiklikler

Düzenleyen: Philip Le Riche

Düzenleme onaylandı tarafından Taylor Dixon

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Flat-Topped (Low Profile) Connectors
[* black] To disconnect flat connectors like this one, use a spudger to pry up each side. Then, lift the connector straight up from its socket.
[* icon_reminder] To reinstall, carefully position the connector, and then press it straight down until it snaps into its socket. Finger pressure is all that is required. If it won't snap home it'll be because it isn't correctly positioned. Sometimes it can take a little patience to find exactly the right position.
[* icon_reminder] To reinstall, carefully position the connector, and then press it straight down until it snaps into its socket. Finger pressure is all that is required. If it won't snap home it'll be because it isn't correctly positioned. Sometimes it can take a little patience to find exactly the right position.