4. Adımdaki Değişiklikler
Düzenleyen: Spencer Day —
Düzenleme onaylandı tarafından Spencer Day
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Other Ribbon Cable Connectors | |
| - | [* icon_note] Here's another type of ribbon connector, commonly found on [[Topic:Microsoft TV Console|Xbox gaming consoles|new_window=true]]. |
| - | [* black] To remove it, use a spudger or clean fingernail to lift the clear blue tab away from the connector. |
| - | [* black] Next, use the tip of the spudger to push the plastic locking tab away from the socket—it should only move about 2 mm. |
| - | [* black] Pull the ribbon cable out of the connector in the direction of the cable. |
| + | [* icon_note] There are many other types of ribbon cable connectors that might require you to mix-and-match disconnection methods. Some [[Topic:Microsoft TV Console|Xbox gaming consoles|new_window=true]] have ribbons cables with a section that loops around the connector, ''and'' have a locking tab. |
| + | [* black] To disconnect this connector, use a spudger or clean fingernail to lift the looped tab away from the connector. |
| + | [* black] Then, use the tip of the spudger to push the plastic locking tab away from the socket—it should only move about 1–2 mm. |
| + | [* black] You can now pull the cable straight out of its socket. |
| + | [* icon_reminder] To reinstall: |
| + | [* black] Fully insert the cable into its socket under the locking tab. |
| + | [* black] Loop the tab around the front of the connector. |
| + | [* black] Use a spudger or clean fingernail to push in the locking tab, securing the cable. |