6. Adımdaki Değişiklikler
Düzenleyen: Jeff Suovanen —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] Whenever you install a screw, first turn the screw counter-clockwise (in the “loosey” direction) to “seat” the screw. |
|---|---|
| + | [* black] Turn slowly until you feel the screw level off and sink slightly, then stop. |
| + | [* black] Now it's safe to tighten the screw. |
| + | [* icon_note] A properly seated screw will turn easily until it's fully tight. |
| + | [* icon_caution] An improperly seated screw is increasingly difficult to tighten—because its misaligned threads are cutting into the threads in the screw hole, causing permanent damage. This is known as "cross-threading." |
| + | [* black] If your screw doesn't tighten easily, back off and re-seat it. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi