2. Adımdaki Değişiklikler
Düzenleyen: Jeff Suovanen —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [title] Size Selection |
|---|---|
| + | [* icon_note] A correctly sized driver should “fill up” the screw head, utilizing both the full depth and width of the socket. |
| + | [* black] Beginners commonly make the mistake of using a driver that’s too small. An undersized driver slips easily, damaging the screw head and making it difficult to turn afterward—even with a correctly-sized driver. This is known as a ''stripped screw''. |
| + | [* black] An oversized driver fits into the screw only shallowly, if at all. |
| + | [* black] When you find a driver that fits about right, compare the next size up as well as the next size down before you proceed. |
| + | [* black] In general, use the largest driver size that fits snugly into the screw. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi