Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_caution] Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.
-[* black] Insert a plastic card between the lower right battery cell and the rear case at the lower righthand corner.
+[* black] Insert a plastic card under the lower battery cell, at the lower right-hand corner.
[* icon_note] If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.