Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: iRobot

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* icon_note] Open the device between 90 and 100 degrees, then rest it on its side.
+[* red] While supporting both halves of the device with one hand, unscrew the upper 5.3 mm T8 Torx screw.
+[* icon_note] Repeat the same process for the identical bottom screw.
+[* icon_caution] Be sure to hold the display and upper case together with one hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi