Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Vanno Tun

Düzenleme onaylandı tarafından Vanno Tun

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Use a #1 Phillips head screwdriver to remove the screws on the RAM's cover panel, as seen in image.
[* black] Then, use a flat edge tool to pry the cover off, as seen in image.
-[* black] Use your fingers to push the RAM tabs, as seen in image, that secure the RAM outward (away from the RAM). The RAM should then pop up.
+[* red] Use your fingers to push the RAM tabs, as seen in image, that secure the RAM outward (away from the RAM). The RAM should then pop up.
[* black] Finally, gently pull the RAM away from the connection. (Repeat this process until all the RAM has been removed from the device).